Manual device restart using a magnet:
If the “Gira G1” stops reacting, you can restart the “Gira G1” using a commercially available magnet:
- Place the magnet in front of the Gira logo of the “Gira G1” for approx. three seconds.
- The “Gira G1” restarts, the configuration is retained.
A Western plug is used to connect the receiver to the receiver cable. If this plug is not correctly connected to the receiver, the bell signal may be very quiet. However, voice communication is not necessary impaired as a result.
To resolve the problem, check that the Western plug is connected properly. The plug must click into the receiver socket twice so that it fits flush.
Electrical devices may only be installed by a qualified electrician. Please see the information at: https://www.gira.de/service/bauherren/installationshinweis.html
The surface-mounted video home station Plus offers ten ringtone melodies in WAVE format pre-installed on the SD card. All ringtone melodies can be changed.
You can hear the ringtone melodies here: https://www.gira.de/data3/rufmelodien_1239xx.zip.
The “DCS” system camera image cannot be called up separately.
Basic system information for Gira door communication can be found here.
Electrical devices may only be installed by a qualified electrician. Please see the information at https://www.gira.de/service/bauherren/installationshinweis.html
Send us an E-mail. We will reply to you in writing as soon as possible.
We would be happy to advise you.
Monday to Thursday 9:00am – 5:00 pm Friday 9:00 am – 12:00pm